Home / Swipe / Swipe Konnect 3

Flash and Download Swipe Konnect 3 Stock Rom Original firmware

Download Swipe Konnect 3 Stock Firmware 

Download the latest Swipe Konnect 3 Stock Rom (original firmware, flash file) Swipe Konnect 3 You can check out our Swipe update page for latest information on Swipe Konnect 3 update rollout.

The Swipe Konnect 3 Stock Rom will help you to Upgrade, Downgrade, or re-install Stock Rom Stock Firmware (OS) on your Mobile Device. Stock Rom Flash File (ROM) also helps you to repair the Mobile device, if it is facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue.

Download Official Swipe Konnect 3 Stock Firmware Rom ( Direct link )

Firmware File Name: Swipe_Konnect_3_V09_20150209_rda_total-(Flash-File.Net).zip
Firmware File Size: 226 MB
How to Flash Firmware: Guide How to Flash Firmware

Click Here to Start Download


Firmware File Name: Swipe_Konnect_3_V11_20150810_RDA_total-(Flash-File.Net).zip
Firmware File Size: 244 MB
How to Flash Firmware: Guide How to Flash Firmware

Click Here to Start Download

How to Flash or Install Swipe Konnect 3 Firmware (ROM)

STEP 1 : Download and extract the Swipe Konnect 3 Stock Rom firmware (Flash File)

STEP 2 : After extracting, you will get the Firmware File, Flash Tool, Driver and How-to Flash Guide .

STEP 3 :Download and install USB Driver on your Computer (if in case USB Drivers, is already installed on your computer then SKIP this step) .

Step 4: Follow the Link Guide to Flash the Stock Firmware (flash file) on your Swipe Konnect 3 Stock Firmware (flash file).

Guide How to Flash Firmware

Important Notes:

Please Take a Backup: Flashing or installing the Swipe Konnect 3 Stock Firmware (ROM) will delete your data from the device. Therefore, we recommend you to take a backup of your data before using the Xperia Flash Tool, as it will help you to recover the data.

Flashing the stock firmware on your Swipe Konnect 3 with the following method will wipe all your data from the device. So make sure you backup all your important data before proceeding.

The Swipe Konnect 3  officially releases the firmware shared above. It helps you to recover the Swipe Konnect 3 device, if it ever gets a boot loop, software error, update error, hanging, and dead issue.

Request Swipe Konnect 3 Firmware: If you are looking for any Swipe Konnect 3 specific firmware that is not listed above, then you can request it through the comment box below (do not request firmware through the contact page or else it will be ignored).

Leave a Reply