Home / SuperTab / SuperTab R10 3G KRC1004

Flash and Download SuperTab R10 3G KRC1004 Stock Rom Original firmware

Download SuperTab R10 3G KRC1004 Stock Firmware 

Download the latest SuperTab R10 3G KRC1004 Stock Rom (original firmware, flash file) SuperTab R10 3G KRC1004 You can check out our SuperTab update page for latest information on SuperTab R10 3G KRC1004 update rollout.

The SuperTab R10 3G KRC1004 Stock Rom will help you to Upgrade, Downgrade, or re-install Stock Rom Stock Firmware (OS) on your Mobile Device. Stock Rom Flash File (ROM) also helps you to repair the Mobile device, if it is facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue.

Download Official SuperTab R10 3G KRC1004 Stock Firmware Rom ( Direct link )

The Stock Firmware can be used to re-install the original OS on the device. It can also be used to fix any software related issue, boot loop issue, or dead issue.

Firmware File Name: SuperTab_R10_3G_MT6582_KRC1004_20151019_4.4.2-(Flash-File.Net).zip
Firmware File size: 572 MB
How to Flash firmware: Guide How to Flash Firmware

Click Here to Start Download

How to Flash SuperTab R10 3G KRC1004 Firmware (ROM)

STEP 1 : Download and extract the SuperTab R10 3G KRC1004 Stock Rom firmware (Flash File)

STEP 2 : After extracting, you will get the Firmware File, Flash Tool, Driver and How-to Flash Guide .

STEP 3 :Download and install USB Driver on your Computer (if in case USB Drivers, is already installed on your computer then SKIP this step) .

Step 4: Follow the Link Guide to Flash the Stock Firmware (flash file) on your SuperTab R10 3G KRC1004 Stock Firmware (flash file).

Guide How to Flash Firmware

Important Notes:

Download Flash Tool: If you are looking for the official SP Flash Tool, then head over to Get SP Flash Tool for Windows or Get SP Flash Tool for Linux page.

Caution: On SuperTab R10 3G KRC1004, We do NOT recommend to Flash the Preloader.bin. As it may brick the SuperTab R10 3G KRC1004, therefore we recommend you to Untick the Preloader while Flashing the SuperTab R10 3G KRC1004 firmware.

Flashing the stock firmware on your SuperTab R10 3G KRC1004 with the following method will wipe all your data from the device. So make sure you backup all your important data before proceeding.

The SuperTab R10 3G KRC1004  officially releases the firmware shared above. It helps you to recover the SuperTab R10 3G KRC1004 device, if it ever gets a boot loop, software error, update error, hanging, and dead issue.

Request SuperTab R10 3G KRC1004 Firmware: If you are looking for any SuperTab R10 3G KRC1004 specific firmware that is not listed above, then you can request it through the comment box below (do not request firmware through the contact page or else it will be ignored).

Leave a Reply

Your email address will not be published. Required fields are marked *