Friday , September 24 2021
Home / Multilaser / Multilaser MS6

Flash and Download Multilaser MS6 Stock Rom Original firmware

Download Multilaser MS6 Stock Firmware 

Download the latest Multilaser MS6 Stock Rom (original firmware, flash file) Multilaser MS6 You can check out our Multilaser update page for latest information on Multilaser MS6 update rollout.

Multilaser MS6

The Multilaser MS6 Stock Rom will help you to Upgrade, Downgrade, or re-install Stock Rom Stock Firmware (OS) on your Mobile Device. Stock Rom Flash File (ROM) also helps you to repair the Mobile device, if it is facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue.

Multilaser MS6 Stock Firmware (flash file)

Firmware File Name : Multilaser_MS6_MT6582_08282015_4.4.2.zip
Firmware File Size : 703 MB
Download Flash Tool : Download SP Flash Tool for Windows | Download SP Flash Tool for Linux
How to Flash firmware : Guide How to Flash Firmware

Click Here to Start Download

How to Flash or Install Multilaser MS6 Firmware (ROM)

STEP 1 : Download and extract the Multilaser MS6 Stock ROM (Firmware Flash File) package on the computer.
STEP 2 : After extracting the package, you will get the Multilaser MS6 USB Driver, Firmware (ROM), Flash Tool, and How-to Flash Manual.
STEP 3 : Install the provided USB Driver on the computer. If in case you have already installed the Multilaser MS6 USB Driver on the computer, then SKIP this step.
STEP 4 Follow the Link Guide to Flash the Stock Firmware (flash file) Multilaser MS6 device.

Guide How to Flash Firmware

Important Notes::

[#]Download Flash Tool Latest release: If you wish to download the latest version of SP Flash Tool, then head over to Download SP Flash Tool for Windows or Download SP Flash Tool for Linux page.

[#] Please Take a Backup: Flashing or installing the Multilaser MS6 Device, then we recommend you to take backup of your personal data from the Multilaser device, as flashing the ROM (firmware) will permanently delete your personal data from the device.

[#] Flashing the stock firmware on your Multilaser MS6 with the following method will wipe all your data from the device. So make sure you backup all your important data before proceeding.

[#] The Multilaser MS6  officially releases the firmware shared above. It helps you to recover the Multilaser MS6 device, if it ever gets a boot loop, software error, update error, hanging, and dead issue.

[#] Request Multilaser MS6 Firmware: If you are looking for any Multilaser MS6 specific firmware that is not listed above, then you can request it through the comment box below (do not request firmware through the contact page or else it will be ignored).

Leave a Reply

Your email address will not be published. Required fields are marked *