Home / Multilaser / Multilaser M9 ML01

Flash and Download Multilaser M9 ML01 Stock Rom Original firmware

Download Multilaser M9 ML01 Stock Firmware 

Download the latest Multilaser M9 ML01 Stock Rom (original firmware, flash file) Multilaser M9 ML01 You can check out our Multilaser update page for latest information on Multilaser M9 ML01 update rollout.

The Multilaser M9 ML01 Stock Rom will help you to Upgrade, Downgrade, or re-install Stock Rom Stock Firmware (OS) on your Mobile Device. Stock Rom Flash File (ROM) also helps you to repair the Mobile device, if it is facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue.

Download Official Multilaser M9 ML01 Stock Firmware Rom ( Direct link )

Firmware File Name: Multilaser_M9_ML01_NB172-(Flash-File.Net).zip
Firmware File Size: 514 MB
Download Flash Tool: RockChip Batch Tool
How to Flash Firmware: Guide How to Flash Firmware

Click Here to Start Download

How to Flash or Install Multilaser M9 ML01 Firmware (ROM)

STEP 1 : Download and extract the Multilaser M9 ML01 Stock Rom firmware (Flash File)

STEP 2 : After extracting, you will get the Firmware File, Flash Tool, Driver and How-to Flash Guide .

STEP 3 :Download and install USB Driver on your Computer (if in case USB Drivers, is already installed on your computer then SKIP this step) .

Step 4: Follow the Link Guide to Flash the Stock Firmware (flash file) on your Multilaser M9 ML01 Stock Firmware (flash file).

Guide How to Flash Firmware

Important Notes:

Download Flash Tool: If you are looking for the official RockChip Batch Tool, then head over to RockChip Batch Tool page.

Please Take a Backup: Flashing or installing the Multilaser M9 ML01 Stock Firmware (ROM) will delete your data from the device. Therefore, we recommend you to take a backup of your data before using the Xperia Flash Tool, as it will help you to recover the data.

Flashing the stock firmware on your Multilaser M9 ML01 with the following method will wipe all your data from the device. So make sure you backup all your important data before proceeding.

The Multilaser M9 ML01  officially releases the firmware shared above. It helps you to recover the Multilaser M9 ML01 device, if it ever gets a boot loop, software error, update error, hanging, and dead issue.

Request Multilaser M9 ML01 Firmware: If you are looking for any Multilaser M9 ML01 specific firmware that is not listed above, then you can request it through the comment box below (do not request firmware through the contact page or else it will be ignored).

Leave a Reply

Your email address will not be published. Required fields are marked *