Sunday , June 20 2021
Home / Jiake / Jiake X3S

Flash and Download Jiake X3S Stock Rom Original firmware

Download Jiake X3S Stock Firmware 

Download the latest Jiake X3S Stock Rom (original firmware, flash file) Jiake X3S You can check out our Jiake update page for latest information on Jiake X3S update rollout.

Jiake X3S

The Jiake X3S Stock Rom will help you to Upgrade, Downgrade, or re-install Stock Rom Stock Firmware (OS) on your Mobile Device. Stock Rom Flash File (ROM) also helps you to repair the Mobile device, if it is facing any Software Issue, Bootloop Issue, IMEI Issue, or Dead Issue.

Jiake X3S Stock Firmware File (flash file)

Firmware File Name : Jiake_X3S_MT6592_20140312_V1.1.2.zip
Firmware File Size : 378 MB
Download Flash Tool : Download SP Flash Tool for Windows | Download SP Flash Tool for Linux
How to Flash firmware : Guide How to Flash Firmware

Click Here to Start Download


Firmware File Name : Jiake_X3S_MT6592_20140312_4.2.2_OTA.zip
Firmware File Size : 502 MB
How to Flash firmware : Copy update.zip to phone sd memory and flash it from stock recovery mode.

Click Here to Start Download

How to Flash or Install Jiake X3S Firmware (ROM)

STEP 1 : Download and extract the Jiake X3S Stock ROM (Firmware Flash File) package on the computer.
STEP 2 : After extracting the package, you will get the Jiake X3S USB Driver, Firmware (ROM), Flash Tool, and How-to Flash Manual.
STEP 3 : Install the provided USB Driver on the computer. If in case you have already installed the Jiake X3S USB Driver on the computer, then SKIP this step.
STEP 4 FFF4412 Jiake X3S device.

Follow Complete Tutorial

Important Notes::

[#]Download Flash Tool Latest release: If you want to download the latest version of SP Flash Tool, then check out Download SP Flash Tool for Windows or Download SP Flash Tool for Linux page.

[#] Please Take a Backup: Flashing or installing the Jiake X3S device, then take a backup of everything because your data will be deleted or removed post flashing or installing the firmware.

[#] Flashing the stock firmware on your Jiake X3S with the following method will wipe all your data from the device. So make sure you backup all your important data before proceeding.

[#] The Jiake X3S  officially releases the firmware shared above. It helps you to recover the Jiake X3S device, if it ever gets a boot loop, software error, update error, hanging, and dead issue.

[#] Request Jiake X3S Firmware: If you are looking for any Jiake X3S specific firmware that is not listed above, then you can request it through the comment box below (do not request firmware through the contact page or else it will be ignored).

Leave a Reply

%d bloggers like this: